DLM suddenly kicked in again on my line and today I have the following message in My Sky:
Your Connection Details
We constantly monitor your line to make sure it has been set to support the fastest speed possible whilst maintaining a stable connection.
Line connection testing completed on 09/06/2014, resulting in the following settings:
Download speed setting
Your connection has been set to a download speed of up to 16.4Mbps .
Upload speed setting
Your connection has been set to an upload speed of up to 2.6Mbps .
These line settings make sure that your line maintains a stable connection.
Looks good, I was only getting 14Mbps before, and I thought 1.3Mbps was the maximum upload. However when I look at my router stats I get:
Router Statistics
System Up Time: 66:37:38
Port Status TxPkts RxPkts Collision Pkts Tx b/s Rx b/s Up Time
WAN PPPoA 7414044 12404157 0 344602 10482559 66:36:46
LAN Down 0 0 0 0 0 00:00:00
WLAN Up 12918794 7928995 0 10169633 393315 66:37:12
Broadband Link Downstream Upstream
Connection Speed 14302 kbps 1308 kbps
Line Attenuation 28.0 dB 16.9 dB
Noise Margin 6.1 dB 4.4 dB
Is there anything I can do to get the speeds to which the DLM has set my line? Surely if that's what the testing says I should have, that should be what I get? I am using the new black Sky Hub
Your Connection Details
We constantly monitor your line to make sure it has been set to support the fastest speed possible whilst maintaining a stable connection.
Line connection testing completed on 09/06/2014, resulting in the following settings:
Download speed setting
Your connection has been set to a download speed of up to 16.4Mbps .
Upload speed setting
Your connection has been set to an upload speed of up to 2.6Mbps .
These line settings make sure that your line maintains a stable connection.
Looks good, I was only getting 14Mbps before, and I thought 1.3Mbps was the maximum upload. However when I look at my router stats I get:
Router Statistics
System Up Time: 66:37:38
Port Status TxPkts RxPkts Collision Pkts Tx b/s Rx b/s Up Time
WAN PPPoA 7414044 12404157 0 344602 10482559 66:36:46
LAN Down 0 0 0 0 0 00:00:00
WLAN Up 12918794 7928995 0 10169633 393315 66:37:12
Broadband Link Downstream Upstream
Connection Speed 14302 kbps 1308 kbps
Line Attenuation 28.0 dB 16.9 dB
Noise Margin 6.1 dB 4.4 dB
Is there anything I can do to get the speeds to which the DLM has set my line? Surely if that's what the testing says I should have, that should be what I get? I am using the new black Sky Hub