I just got a Zyxcel p660H D1 and it connects very briefly using the username and password i got from my old SR101 and i can ping out to 8.8.8.8 but then it dies and drops the connection on the wan side.
I have included my logs and settings can anyone just have a once over to check it please
# Time Message Source Destination Notes1 01/01/2000 00:02:48 ppp:IPCP Closing
2 01/01/2000 00:02:48 ppp:LCP Closing
3 01/01/2000 00:02:48 board 0 line 0 channel 0, call 25, C02 Call Terminated CALL DETAIL RECORD
4 01/01/2000 00:02:30 ppp:IPCP Opening
5 01/01/2000 00:02:30 ppp:IPCP Starting
6 01/01/2000 00:02:30 ppp:CHAP Opening
7 01/01/2000 00:02:30 ppp:LCP Opening
8 01/01/2000 00:02:27 ppp:LCP Starting
9 01/01/2000 00:02:27 board 0 line 0 channel 0, call 25, C02 OutCall Connected 512000 CALL DETAIL RECORD
10 01/01/2000 00:02:27 Packet Trigger: Protocol=1, Data=Packet Trigger: Protocol=1, Da PACKET TRIGGER
11 01/01/2000 00:02:27 board 0 line 0 channel 0, call 25, C01 Outgoing Call dev=5 ch=0 CALL DETAIL RECORD
Settings:
http://s10.postimg.org/gzhz2zmo9/image.png
http://s24.postimg.org/rp1ba9nat/image.png
I have included my logs and settings can anyone just have a once over to check it please
# Time Message Source Destination Notes1 01/01/2000 00:02:48 ppp:IPCP Closing
2 01/01/2000 00:02:48 ppp:LCP Closing
3 01/01/2000 00:02:48 board 0 line 0 channel 0, call 25, C02 Call Terminated CALL DETAIL RECORD
4 01/01/2000 00:02:30 ppp:IPCP Opening
5 01/01/2000 00:02:30 ppp:IPCP Starting
6 01/01/2000 00:02:30 ppp:CHAP Opening
7 01/01/2000 00:02:30 ppp:LCP Opening
8 01/01/2000 00:02:27 ppp:LCP Starting
9 01/01/2000 00:02:27 board 0 line 0 channel 0, call 25, C02 OutCall Connected 512000 CALL DETAIL RECORD
10 01/01/2000 00:02:27 Packet Trigger: Protocol=1, Data=Packet Trigger: Protocol=1, Da PACKET TRIGGER
11 01/01/2000 00:02:27 board 0 line 0 channel 0, call 25, C01 Outgoing Call dev=5 ch=0 CALL DETAIL RECORD
Settings:
http://s10.postimg.org/gzhz2zmo9/image.png
http://s24.postimg.org/rp1ba9nat/image.png